Beech Plywood
Description
Beech plywood is a composite material formed by peeling or slicing the beech tree to form veneer, and then synthesizing the veneer together in a certain sequence. The use of beech plywood is very wide, and it is currently used in piano manufacturing, mechanical parts, fitness equipment and other fields. It is a plywood with strong bearing capacity, good support, and a stable appearance. Flatsawn surfaces tend to be very plain, while quartersawn surfaces exhibit a silvery fleck pattern.
Beech plywood is a kind of LVL board with strong bearing capacity, good support and stable appearance, which is used for the most demanding structures. The beech wood is cross-bonded. This structure can improve the lateral bending strength and the rigidity of the board, and can enhance the shear strength when used as a beam. After adopting the cross-bonded layer, there is a significant reduction in the humidity-related changes in the board as a whole. It can stabilize the overall structure and is a popular material for floor and wall panels.
Beech is typically a pale cream color, sometimes with a pink or brown hue. Veneer tends to be slightly darker colored, as slicing the veneer usually requires the wood to be prepared with steam, which gives the wood a more golden tone. Flatsawn surfaces tend to be very plain, while quartersawn surfaces exhibit a silvery fleck pattern. Euro Beech is commonly used for flooring, boatbuilding, furniture, cabinetry, musical instruments (piano pinblocks), plywood, and turned objects.
Detail
Production Process
RAW MATERIALS STORAGE
We have several warehouses to store all our Raw Materials like Poplar Veneer, Hardwood Veneer, Sapelli/Bintangor/Okoume/Pencil Cedar/Pine Face/Back, etc. Once new raw materials delivered into our warehouses, our workers will inspect all and place different grade ram materials into different warehouses.
RAW MATERIALS PRETREATMENT
Once production started, our workers will pretreat the raw materials including the sides joint, gluing.
VENEERS ASSEMBLE
Our workers will assemble the wood veneers one layer by one layer on the assembly line. Like the 18MM will consist of 11 layers wood veneers.
RAW BOARDS PREPRESS
After Veneer Assemble Process, all the Raw Boards need to be prepressed by Cold Press Machine. So that the Raw Boards can be shaped into Raw Plywood. This process need at least 2 hours.
RAW PYWOOD HOT PRESS
Shaped Raw Plywood will be laminated by Hot Press Machine. This process need at least 1 hour. After Hot Press, the Raw Plywood bonding will be strong.
RAW PYWOOD REPATCHING & PUTTYING
This process is to fill the gap on the surface of raw plywood.
RAW PYWOOD SANDING
Put the Raw Plywood into Sanding Machine. After sanding, the raw plywood surface become smooth, and thickness will be even also.
FACE/BACK VENEER ASSEMBLE
Raw Plywood will be glued firstly. Then workers will place the face/back veneer like Sapelli /Bintangor/Okoume/Pencil Cedar on the both sides of raw plywood.
COLD PRESS
After Face/Back Veneer Assemble Process, plywood will be placed into Cold Press Machine again. So that the Face/Back Veneer will bond with the raw plywood initialy. This process need at least 1 hour.
LAMINATED PYWOOD HOT PRESS
This process need at least 30 minutes. After second Hot Press, Face/Back Veneer will bond with the raw plywood strong.
CUTTING & POLISHING
All plywood will be cut into standard size like1220X2440MM. Then plywood will be polished gain to make the face/back smooth.
INSPECTION & PACKING
Inspect boards for defects (e.g., cracks, uneven density, surface imperfections). Grade the qualified boards based on quality standards. Stack and package the boards for storage or shipment.
Quality Control & Packing
