了解有关最新建筑材料的专家见解和行业趋势。

Birch Plywood

The Baltic Birch tree originates in the Baltic states – Estonia, Latvia and Lithuania. Baltic birch plywood is primarily produced in Finland and Russia.
立即联系
Birch Plywood

说明

Fancy Plywood is a kind of high-quality wood panel product, that stands at a higher standard than commercial plywood with high–grade raw material and a more strict process which makes it an excellent strength-to-weight ratio and is visually more appealing to standard ones. It’s used for high-end furniture and the decoration industry.

The Baltic Birch tree originates in the Baltic states – Estonia, Latvia and Lithuania. Baltic birch plywood is primarily produced in Finland and Russia.

Botanical Name: Betula Spp.
Common Names: Baltic Birch, Russian Birch
Sources: The Baltic Birch Tree originates in the Baltic States – Estonia, Latvia and Lithuania. Baltic Birch Plywood is primarily produced in Finland and Russia.
Appearance: Valued for its appealing light color, Baltic Birch Plywood features a uniform grain, smooth texture and outstanding durability.

Physical Properties: Baltic birch varies in thickness and contains an odd number of plies. The two outer plies, which comprise the front and back, show vertical wood grain that runs lengthwise throughout the sheets. Inner plies have alternating horizontal or vertical grain, which provides increased strength and resistance to warping or moisture damage.

Working Properties: While most plywood tends to be painted, Baltic birch is attractive enough to stand alone with light sanding, varnishing or staining.
Uses: Because of its pleasing appearance, it is a wood typically used for cabinetry and other furniture. Baltic birch is suitable for a variety of projects, from cabinetmaking to building construction.

立即联系

详细信息

产品名称
FANCY PLYWOOD -- UV PAINTING GRADE BIRCH PLYWOOD
核心材料
100% 杨木、100% 桉树或组合芯材
热压机次数
两次、三次
胶水类型
MR /E0/E1/ CARB P2(EPA) / WBP 胶水
面部和背部
UV BIRICH\BLEACHED POPLAR\ AAA GRADE BLACK WALNUT OR RED OAK\BEECH\CHERRY\SAPELLE\PINE\MELAMINE \HPL ,ETC
厚度
2.5/3.6/5.2/9/12mm/15mm/18mm 或根据要求提供
宽*长
1220x2440mm, 1250x2500mm , 或根据要求提供
水分
8-12%
申请
furniture\cabinet\ decoration
付款条款
预付 30%tt ,余款凭账单副本或见票即付 lc
供应能力
每月 10000 立方米
订购数量
20 英尺集装箱
交货时间
支付首付款后 15-20 天

生产流程

原料储存

我们有多个仓库来储存所有原材料,如白杨木单板、硬木单板、无患子/Bintangor/Okoume/铅笔杉/松木面/背等。一旦新的原材料运送到我们的仓库,我们的工人就会对所有原材料进行检查,并将不同等级的木材放入不同的仓库。

原材料预处理

生产开始后,我们的工人会对原材料进行预处理,包括边接、胶合。

贴面组装

我们的工人会在流水线上一层一层地组装木皮。比如 18MM 就由 11 层木皮组成。

原板印前

单板组装过程结束后,所有原板都需要用冷压机进行预压。这样,原板就能被塑造成原胶合板。这个过程至少需要 2 个小时。

原木热压机

成型的原始胶合板将通过热压机进行层压。这个过程至少需要 1 个小时。热压后,生胶合板的粘合力会很强。

原木修补和抹灰

这个过程是为了填补未加工胶合板表面的缝隙。

原木打磨

将生胶合板放入砂光机。打磨后,生胶合板表面会变得光滑,厚度也会均匀。

面/背板组装

首先粘合原胶合板。然后,工人会在生胶合板的两面贴上面/背单板,如沙佩利/宾坦戈/奥古曼/铅笔杉。

冷压

面/背单板组装工序结束后,胶合板将再次放入冷压机中。这样面/背单板就能与生胶合板初步粘合。这个过程至少需要 1 个小时。

层压黄杨木热压机

这个过程至少需要 30 分钟。第二次热压后,面/背单板将与原胶合板牢固粘合。

切割和抛光

所有胶合板都将切割成标准尺寸,如 1220X2440MM。然后对胶合板进行抛光,使其表面/背面光滑。

检查和包装

检查木板是否有缺陷(如裂缝、密度不均、表面瑕疵等)。根据质量标准对合格的木板进行分级。堆放和包装木板,以便储存或装运。

质量控制和包装

我们有一套坚持不懈的装运前检验制度。订单确认后,检验过程立即开始。原材料的等级和类型、加工方法、检验和包装细节将告知工厂管理层。
立即联系

我们的工厂和证书

我们有一套坚持不懈的装运前检验制度。订单确认后,检验过程立即开始。原材料的等级和类型、加工方法、检验和包装细节将告知工厂管理层。
立即联系

联系我们