Birch Plywood

설명
Fancy Plywood is a kind of high-quality wood panel product, that stands at a higher standard than commercial plywood with high–grade raw material and a more strict process which makes it an excellent strength-to-weight ratio and is visually more appealing to standard ones. It’s used for high-end furniture and the decoration industry.
The Baltic Birch tree originates in the Baltic states – Estonia, Latvia and Lithuania. Baltic birch plywood is primarily produced in Finland and Russia.
Botanical Name: Betula Spp.
Common Names: Baltic Birch, Russian Birch
Sources: The Baltic Birch Tree originates in the Baltic States – Estonia, Latvia and Lithuania. Baltic Birch Plywood is primarily produced in Finland and Russia.
Appearance: Valued for its appealing light color, Baltic Birch Plywood features a uniform grain, smooth texture and outstanding durability.
Physical Properties: Baltic birch varies in thickness and contains an odd number of plies. The two outer plies, which comprise the front and back, show vertical wood grain that runs lengthwise throughout the sheets. Inner plies have alternating horizontal or vertical grain, which provides increased strength and resistance to warping or moisture damage.
Working Properties: While most plywood tends to be painted, Baltic birch is attractive enough to stand alone with light sanding, varnishing or staining.
Uses: Because of its pleasing appearance, it is a wood typically used for cabinetry and other furniture. Baltic birch is suitable for a variety of projects, from cabinetmaking to building construction.
세부 정보
생산 프로세스
원자재 보관
포플러 베니어, 원목 베니어, 사펠리/빈탕고르/오쿠메/펜슬 시더/파인 페이스/백 등 모든 원자재를 보관할 수 있는 여러 창고가 있습니다. 새로운 원자재가 창고에 입고되면 작업자가 모든 원자재를 검사하고 다른 등급의 램 자재를 다른 창고에 배치합니다.
원자재 전처리
생산이 시작되면 작업자는 측면 조인트, 접착 등 원자재를 전처리합니다.
베니어 조립
작업자는 조립 라인에서 목재 베니어를 한 층씩 조립합니다. 18mm와 같이 11겹의 우드 베니어로 구성됩니다.
원판 프리프레스
베니어 조립 공정 후, 모든 원판은 냉간 프레스 기계로 프리프레싱해야 합니다. 그래야 원판 합판의 모양을 만들 수 있습니다. 이 과정은 최소 2시간이 필요합니다.
원목 핫 프레스
성형된 원판 합판은 핫 프레스 기계로 적층됩니다. 이 과정은 최소 1시간이 필요합니다. 핫 프레스 후 원시 합판 결합이 강해집니다.
원목 재패치 및 퍼티링
이 과정은 원판 합판 표면의 틈을 메우는 과정입니다.
원목 샌딩
합판을 샌딩 머신에 넣습니다. 샌딩 후 합판 표면이 매끄러워지고 두께도 균일 해집니다.
페이스/백 베니어 어셈블리
원목 합판을 먼저 접착합니다. 그런 다음 작업자가 사펠리/빈탕고르/오쿠메/펜슬 시더와 같은 페이스/백 베니어를 원목 합판 양쪽에 배치합니다.
콜드 프레스
페이스/백 베니어 조립 공정이 끝나면 합판을 다시 냉간 프레스 기계에 넣습니다. 이렇게 하면 페이스/백 베니어가 처음에 원합판과 접착됩니다. 이 과정은 최소 1시간이 필요합니다.
라미네이트 파이우드 핫 프레스
이 과정은 최소 30분이 필요합니다. 두 번째 핫 프레스 후, 페이스/백 베니어는 원판 합판과 강하게 결합됩니다.
절단 및 연마
모든 합판은 1220X2440MM과 같은 표준 크기로 절단됩니다. 그런 다음 합판을 연마하여 앞면 / 뒷면을 매끄럽게 만듭니다.
검사 및 포장
보드에 결함(예: 균열, 고르지 않은 밀도, 표면 결함)이 있는지 검사합니다. 품질 표준에 따라 적격 보드를 등급을 매깁니다. 보관 또는 배송을 위해 보드를 쌓고 포장합니다.
품질 관리 및 포장










