
설명
상업용 합판 generally refers to the grade of plywood. While it is true that moisture resistant plywood can withstand some amount of moisture and humidity. Commercial plywood is the most widely used type of plywood for interior decoration, room furniture, packing decorate, etc. It is typically a deep pinkish-red brown to dark rusty color. Sapele Plywood has a lustrous grain and consistent color. The grain pattern is uniform with a satiny texture. Sapele Plywood is strong, durable, and accepts stains and finishes very well. Sapele Plywood is a common substitute for South American Mahogany. Common uses for Sapele Plywood are furniture, cabinetry, and other interior applications.
Sapele is known by another name Sapele or Sapelli or Sapele mahogany. Sapele got its name from Sapele City in Nigeria. Where there is a preponderance of the tree. It is exported to other countries of the world from here. Sapele is important for the economy of Nigeria. Sapele wood is considered an alternative to mahogany.
세부 정보
생산 프로세스
원자재 보관
포플러 베니어, 원목 베니어, 사펠리/빈탕고르/오쿠메/펜슬 시더/파인 페이스/백 등 모든 원자재를 보관할 수 있는 여러 창고가 있습니다. 새로운 원자재가 창고에 입고되면 작업자가 모든 원자재를 검사하고 다른 등급의 램 자재를 다른 창고에 배치합니다.
원자재 전처리
생산이 시작되면 작업자는 측면 조인트, 접착 등 원자재를 전처리합니다.
베니어 조립
작업자는 조립 라인에서 목재 베니어를 한 층씩 조립합니다. 18mm와 같이 11겹의 우드 베니어로 구성됩니다.
원판 프리프레스
베니어 조립 공정 후, 모든 원판은 냉간 프레스 기계로 프리프레싱해야 합니다. 그래야 원판 합판의 모양을 만들 수 있습니다. 이 과정은 최소 2시간이 필요합니다.
원목 핫 프레스
성형된 원판 합판은 핫 프레스 기계로 적층됩니다. 이 과정은 최소 1시간이 필요합니다. 핫 프레스 후 원시 합판 결합이 강해집니다.
원목 재패치 및 퍼티링
이 과정은 원판 합판 표면의 틈을 메우는 과정입니다.
원목 샌딩
합판을 샌딩 머신에 넣습니다. 샌딩 후 합판 표면이 매끄러워지고 두께도 균일 해집니다.
페이스/백 베니어 어셈블리
Raw Plywood will be glued firstly. Then workers will place the face/back veneer like Sapelli /Bintanfor/Okoume/Pencil Cedar on the both sides of raw plywood.
콜드 프레스
페이스/백 베니어 조립 공정이 끝나면 합판을 다시 냉간 프레스 기계에 넣습니다. 이렇게 하면 페이스/백 베니어가 처음에 원합판과 접착됩니다. 이 과정은 최소 1시간이 필요합니다.
라미네이트 파이우드 핫 프레스
이 과정은 최소 30분이 필요합니다. 두 번째 핫 프레스 후, 페이스/백 베니어는 원판 합판과 강하게 결합됩니다.
절단 및 연마
모든 합판은 1220X2440MM과 같은 표준 크기로 절단됩니다. 그런 다음 합판을 연마하여 앞면 / 뒷면을 매끄럽게 만듭니다.
검사 및 포장
보드에 결함(예: 균열, 고르지 않은 밀도, 표면 결함)이 있는지 검사합니다. 품질 표준에 따라 적격 보드를 등급을 매깁니다. 보관 또는 배송을 위해 보드를 쌓고 포장합니다.
품질 관리 및 포장






